Below is our range of Sub / Woofers we carry on stock.
NOW IN
STOCK
Seas H1456-08 ER18RNX
Specs:
18 cm cone
driver, for use as a long throw high fidelity woofer/mid woofer. Edge coated
reed/paper pulp cone with perfectly matched moving parts, gives a smooth
extended frequency response. Bump back plate together with very long and light
copper clad aluminum voice coil, allow extreme excursion heavy copper ring
below T shaped pole piece reduce nonlinear and modulation distortion. Extremely
stiff molded injection basket keeps components in perfect alignment. Large windows
in baskets both above and below the spider reduce sound reflection, airflow
noise and cavity responses to a minimum.
Nominal Impedance -8Ω
Frequency Range -45 – 3000Hz
Short term power handling-250w
Long term power handling - 80w
Sensitivity-88.5db
Voice coil diameter-39mm
Voice coil height-18mm
Air gap height-6mm
Linear coil travel
-22mm
Maximum coil travel -35mm
Magnet weight - 0.65Kg
Total Weight -1.91Kg
Voice coil resistance
-5.9Ω
Voice coil inductance-0.67mh
Free Air Resonance-37Hz
BL
- 7.2
Moving mass-14.0g
Effective piston area-136cm2
Vas- 32liters
Qms-1.58
Qes-0.39
Qts-0.32
Seas H1411-08
A26RE4
Specs:
Classic
paper cone with rubber
surround, produce a well-behaved roll off, and reduced resonance
problem.1.5”
diameter Voice coil 4 layer, gives a
high-power handling and reduced compression.Stiff and stable injection molded cast basket
keeps the critical
components aligned. This driver is the upgrade with todays technology
of the
woofer used in Dynaco A25 Speaker system which sold in excess of
1,000,000
pairs.
Nominal Impedance -8Ω
Frequency Range -20 – 1500Hz
Short term power handling-300w
Long term power handling - 80w
Sensitivity-80db
Voice coil diameter-39
Voice coil height-14mm
Air gap height-6mm
Linear Excursion (p-p)
-8mm
Maximum Excursion-35mm
Magnet weight- 1.10Kg
Total Weight -2.10Kg
Voice coil resistance
-6.3Ω
Voice coil inductance-3.8mh
Force factor-9.7
Free Air Resonance-25Hz
Moving mass-37.4g
Effective piston area-350cm2
Vas- 169liters
Qms-3.84
Qes-0.43
Qts-0.39
Seas
CA22RNX H1288-08
Specs:
Classic
hand coated paper cone
and matching natural rubber surrounds produce a well-behaved roll off
characteristic and reduced resonance. Long high temperature voice coil
former
gives low distortion and high-power handling.Large magnet system provides high efficiency and
allows maximum
excursion without mechanical limitation. Cast basket keeps components
in line.
Nominal Impedance-8Ω
Frequency Range -30 – 3000Hz
Short Term Power
Handling
-250w
Long Term Power
Handling
-80w
Sensitivity
-89.5db
Voice Coil Diameter -39mm
Voice Coil Height -18mm
Air Gap Height -6mm
Linear Coil Travel -12mm
Maximum Coil Travel (P-P) -26mm
Magnet Weight
-0.64Kg
Total Weight -2.2Kg
Voice Coil Resistance -6.1Ω
Voice Coil Inductance -1.0mh
Free Air Resonance
-29Hz
Moving Mass -20.9g
Effective Piston Area -230cm2
Vas
-97liters
MS
-2.04
Qes
-0.52
Qts
-0.41
SB17CRC35-8
(6 1/2" not pictured) and SB17CRC35-4 (pictured)
Specss:
Rohacell / Carbon Fiber Cone.
Optimized stiffness /
damping ratio. Vented cast aluminum. Low damping rubber surrounds
improves
transient response. Fiberglass voice coil former. Extended copper
sleeve on
pole piece for low inductance and distortion. CCAW Voice coil reduces
moving
mass, long life silver lead wires. Vented pole piece.SB17CRC35
-8 SB17CRC35 - 4
Nominal impedance8
Ω4
Ω
DC
Resistance5.7 Ω3.1 Ω
Voice Coil
Inductance0.15
mh.13 mh
Effective
Piston Area118
cm²118
cm²
Voice Coil
Diameter35.5
mm 35.5 mm
Air Gap Height5 mm5 mm
Liner Coil Travel11 mm11 mm
Voice coil Height16 mm16 mm
Magnet weight
0.54 kg0.54 kg
Net weight1.56 kg.56 kg
Free Air resonance28 hz31.5 hz
Sensitivity
( 2.83 v / 1 m )87 db(
2.83 v / 1 m)90
db
Mechanical Q Factor3.90
Qms4.32 Qms
Electrical Q Factor0.37 Qes0.35
Qes
Total Q Factor0.34
Qts0.32 Qts
Moving Mass13.3
gms14.2 gms
Force Factor6.0 Tm5.0 Tm
Vas48 litres35.5 itres
Rated power Handling60
Watts60 Watts
SB17NRXC35-8 (6 1/2" pictured)
and SB17NRXC35-4 (not pictured)
Specs:
Vented cast aluminum chassis for
optimum strength. Proprietary
cone material with natural fibres, made in house.Soft low damping surround for good transient
response. Fiberglass
voice coil former. Extended copper sleeve on pole piece for low
inductance and
distortion. CCAW voice coil for reduced moving mass, long life silver
lead wires.
Vented pole piece.
SB17NRXC35
- 8SB17NRXC35
- 4
Nominal impedance8
Ω4
Ω
DC
Resistance5.7
Ω3.1
Ω
Voice Coil
Inductance0.15 mh0.13 mh
Effective
Piston Area118 cm²118 cm²
Voice Coil
Diameter35.5 mm 35.5 mm
Air Gap Height5 mm5 mm
Liner Coil Travel (p - p) 11mm11 mm11 mm
Voice coil Height16 mm16
mm
Magnet weight0.54 kg0.54 kg
Net weight.56 kg1.56 kg
Free Air resonanceFs32 hz35
hz
Sensitivity
( 2.83 v
/ 1 m )89 db (
2.83 v / 1 m)92 db
Mechanical Q Factor5.0 Qms5.5 Qms
Electrical Q Factor0.36 Qes0.34 Qes
Total Q Factor0.34 Qts0.32 Qts
Moving Mass11 gms11.6
gms
Force Factor5.9 Tm4.8 Tm
Vas44.5 litres35.2 litres
Rated power Handling60 Watts60
Watts
Satori MW16P-8 (6 1/2"
pictured) and MW16P-4 (not pictured)
Specs:
Vented cast aluminum chassis. Cone
material Egyptian
paper fibers, made in house. Soft low damping rubber surround for
optimum
transient response. Bimax Spider for improved linearity with a powerful
neodymium motor. Extended copper sleeve on pole piece for reduced
distortion
and low inductance. CCAW voice coil for reduced moving mass, and long
life
silver lead wires, with vented pole piece.
Satori
/ SBMW16P - 8MW16P
- 4
Nominal impedence8
Ω4
Ω
DC
Resistance6.2 Ω3.4 Ω
Voice Coil
Inductance0.2
mh0.2 mh
Effective
Piston Area119 cm²119
cm²
Voice Coil
Diameter36 mm 36 mm
Air Gap Height5 mm5 mm
Liner Coil Travel 12 mm12
mm
Voice coil Height17
mm17 mm
Magnet weight(neo)0.13 kg0.13 kg
Nett weight1.01 kg1.01
kg
Free Air resonance29 hz28 hz
Senstivity
( 2.83 v / 1 m )87.5
db( 2.83 v / 1 m)90
db
Mechanical Q Factor4.5 Qms5.0
Qms
Electrical Q Factor0.35 Qes0.28 Qes
Total Q Factor0.33 Qts0.27
Qts
Moving Mass12.4
gms12.8 gms
Force Factor6.3 Tm5.2 Tm
Vas48
litres50 litres
Rated power Handling
60 Watts60 Watts
Satori
MW19P-8 (7 1/2" pictured) and MW19P-4 (not pictured)
Specs:
Vented aluminum Chassis. Cone
material Egyptian paper
fibers,made in
house. Soft
low damping rubber surround for optimum transient response. BIMAX
Spider for
improved linearity. Powerful Neodymium magnet, fiberglass voice coil
former. Extended
copper sleeve on pole piece for low inductance and reduced distortion.
CCAW
voice coil for reduced moving mass long life silver lead wires.Vented pole piece.
Satori / SBMW19P - 8MW19P - 4
Nominal impedance8
Ω4
Ω
DC
Resistance6 Ω3.4
Ω
Voice Coil
Inductance0.2 mh0.14 mh
Effective
Piston Area158 cm²158 cm²
Voice Coil
Diameter39 mm 39 mm
Air Gap Height6 mm6
mm
Liner Coil Travel ( p -p ) 13.4
mm13.6 mm
Voice coil Height19.4 mm 19.6 mm
Magnet weight(neo)0.15 kg0.15 kg
Net weight1.48 kg1.48 kg
Free Air resonance32.5 hz32
hz
Sensitivity89
db91.5 db
Mechanical Q Factor4.06 Qms4.11 Qms
Electrical Q Factor0.36 Qes0.30 Qes
Total Q Factor0.33 Qts0.28 Qts
Moving Mass 17.9 gms18.4
gms
Force FactorBL7.8 Tm6.5
Tm
Rated power Handling70 Watts70Watts
Satori WO24P-8
(9 1/2" pictured) and WO24P-4 Woofers / Sub Woofer (not pictured)
Specs:
Hard paper cone for improved
piston operation. Large
motor system with under cut pole piece and dual shorting rings. Vented
cast
aluminum chassis, 3" copper voice coil for improved power andling, long
life silver lead wires. Low damping rubber surround, fiberglass voice
coil former,
optimized for vented enclosure, or use with passive radiators.
Satori / SBWO24P
- 8 (91/2")WO24P
- 4
Nominal impedance8
Ω4
Ω
DC
Resistance5.8 Ω
0.3
Ω
Voice Coil
Inductance0.56 mh0.29
mh
Effective
Piston Area255 cm²255
cm²
Voice Coil
Diameter49.5 mm 49.5 mm
Air Gap Height6 mm 6 mm
Liner Coil Travel ( P - P) 17
mm
17 mm
Voice coil Height23 mm23 mm
Magnet weight1.36 kg1.36
kg
Net weight3.7 kg3.7 kg
Free Air resonance 24.5 hz28
hz
Sensitivity
( 2.83
v / 1 m ) 88 db( 2.83 v / 1 m) 91 db
Mechanical Q Factor5.7 Qms6.7 Qms
Electrical Q Factor0.41 Qes0.42 Qes
Total Q Factor0.38 Qts0.40 Qts
Moving Mass44.5 gms42
gms
Force Factor BL9.9 Tm7.6 Tm
Vas87.5 litres70 litres
Rated power Handling90 Watts90 Watts
SB
Acoustics SB34NRXL75-8 (12") Woofer / Sub Woofer
Specs:
Hard paper cone for improved
piston operation. Large
motor system with under cut pole piece and dual shorting rings. Vented
cast
aluminum chassis, 3" copper voice coil for improved power handling,
long
life silver lead wires. Low damping rubber surround, fiberglass voice
coil
former, optimized for vented enclosure, or use with passive radiators.
SB34NRXL
- 8
Nominal impedance8Ω
DC
Resistance6.2
Ω
Voice Coil
Inductance1.2
mh
Effective
Piston Area508 cm²
Voice Coil
Diameter
75.6 mm
Air Gap Height8 mm
Liner Coil Travel (p - p) 20 mm
Voice coil Height28 mm
Magnet weight3.6
kg
Net weight8.9
kg
Free Air Resonance22 hz
Sensitivity91 db
Mechanical Q Factor5.5
Qms
Electrical Q Factor0.29 Qes
Total Q Factor0.28 Qts
Moving Mass93
gms
Force FactorBL16.6 Tm
Vas205 litres
Rated power Handling200 Watts
Gradient
AXT-08 (8") Mid / Woofer up to 3000Hz
Specs:
Excellent cost / performance
ratio. Hard and rigid Kevlar/
paper cone rubber surround. Cast alloy basket and large magnet system.
Solid aluminum
phase plug gives extended frequency response control. Kapton two layer
voice
coil. Audiophile characteristics are in focus.
Gradient AXT - 8
Nominal
impedance8
Ω
DC
Resistance6.8 Ω
Voice Coil
Inductance0.4 mh
Voice Coil
Diameter39
mm
Free
Air Resonance38 hz
Sensitivity
(1w / 1m)91
db
Mechanical
Q Factor7.65 Qms
Electrical
Q Factor0.32 Qes
Total
Q Factor0.30 Qts
Moving
Mass20.8 gms
Force
FactorBL10.4 Tm
Vas 52.2 litres
X
max ( + / - )0.4 mm
Effection
cone area112cm²
Gradient
AXT-10" Mid / Woofer up to 2000Hz or dedicated Subwoofer
Specs:
Excellent cost / performance
ratio. Hard and rigid Kevlar/
paper cone rubber surround. Cast alloy basket and large magnet system.
Solid aluminum
phase plug gives extended frequency response and control. Kapton two
layer
voice coil. Audiophile characteristics are in focus.
Gradient AXT 10"
Nominal impedance
8Ω
Voice Coil
length19
mm
Voice Coil
Diameter39 mm
Free Air Resonance35
hz
Sensitivity (1w / 1m)91.2
db
Mechanical Q Factor4.84
Qms
Electrical Q Factor0.42 Qes
Total Q Factor
0.39Qts
Force FactorBL13.5 Tm
Vas64.2
litres
X max ( + / - )5.5 mm
Gradient
AXT-12" Mid / Woofer up to 2000Hz or dedicated Subwoofer
Features:
Excellent cost / performance
ratio. Hard and rigid Kevlar/
paper cone rubber surround. Cast alloy basket and large magnet system.
Solid aluminum
phase plug gives extended frequency response and control. Kapton two
layer
voice coil. Audiophile characteristics are in focus.